User Tools

Site Tools


documentation:impression_3d:g-code

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

documentation:impression_3d:g-code [2019/10/15 13:58] (current)
dbroqua created
Line 1: Line 1:
 +====== G-Code ======
  
 +Pour Ender 3 avec BL-Touch et avec Cura
 +
 +===== G-Code de d√©marrage =====
 +
 +<​code>​
 +M82 ;Absolute extrusion mode
 +M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
 +M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
 +M204 P500.00 R1000.00 T500.00 ;Setup Print/​Retract/​Travel acceleration
 +M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
 +M220 S100 ;Reset Feedrate
 +M221 S100 ;Reset Flowrate
 +
 +M140 S{material_bed_temperature} ;Set head bed
 +M190 S{material_bed_temperature} ;Wait for head bed
 +M104 S{material_print_temperature} ;Set heat extruder
 +
 +G28 ;Home
 +
 +G29 ;Bed leveling
 +
 +G92 E0 ;Reset Extruder
 +
 +M109 S{material_print_temperature} ;Wait for extruder heat
 +
 +G1 Z2.0 F3000 ;Move Z Axis up
 +G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
 +G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
 +G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
 +G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
 +G92 E0 ;Reset Extruder
 +G1 Z2.0 F3000 ;Move Z Axis up
 +</​code>​
 +
 +
 +===== G-Code de fin =====
 +
 +<​code>​G91 ;Relative positionning
 +G1 E-2 F2700 ;Retract a bit
 +G1 E-2 Z0.2 F2400 ;Retract and raise Z
 +G1 X5 Y5 F3000 ;Wipe out
 +G1 Z10 ;Raise Z more
 +G90 ;Absolute positionning
 +
 +G1 X0 Y{machine_depth} ;Present print
 +M106 S0 ;Turn-off fan
 +M104 S0 ;Turn-off hotend
 +M140 S0 ;Turn-off bed
 +
 +M84 X Y E ;Disable all steppers but Z</​code>​
documentation/impression_3d/g-code.txt · Last modified: 2019/10/15 13:58 by dbroqua